<dd id="ytclb"></dd>
    1. <progress id="ytclb"></progress>

        <dd id="ytclb"></dd>

          C.B.Ferrari E560 G Codes

          C.B.Ferrari Elexa E560 G Codes complete list for cnc machinists who work on C.B.Ferrari cnc machining centers.

          C.B.Ferrari S620 CNC E560

          C.B.Ferrari E560 G Codes

          G CodeDescription
          G0Rapid positioning of the axes in linear interpolation on the plane and in the space in the programmed point.
          G1Work in linear interpolation in the plane and in the space in the programmed point.
          G2Circular interpolation clockwise on the chosen plane or helix
          G3Work in circular interpolation anticlockwise on the chosen plane or helix.
          G4Dwell Time programmed with spindle revolutions (G4/n) or in tenths of a second (G4/s time in sec./10)
          G5-G7-G9G functions recognized only for reasons of compatibility with CNC 132 160. They are executed like G0.
          G10-G11Given to the geometrical programming.
          G13-G16Given to the geometrical programming.
          G17Specifies X Y as the machining plane (where Z is the perpendicular axis) active at the start.
          G18Specifies X Z as the machining plane (where Y is the perpendicular axis).
          G19Specifies Y Z as the machining plane (where X is the perpendicular axis).
          G20-G25For the geometrical programming.
          G26Feedrate on the tool tip also for rotary axes.
          G27Real feedrate of the axes (for rotary DEGREES/MIN).
          G30Cancel G31 function
          G31Active working way (active at the start) Feed on the tip of tool.
          G38Defines ways of copy alternately at parameters given in VCP table (OPTION)
          G39Spindle positioning with angle M from 0° to 360°.
          G40Positioning with Cancel Cutter Radius compensation
          G41Tool Approaching during the work with introduction of radius tool correction on the left of the programmed path.
          G42Tool approaching during the work with introduction of radius tool correction on the right on the programmed path.
          G43Grinding cycle, like G41 and introduction of an oscillatory movement on the axis orthogonal at the work plane.
          G44Grinding cycle like G42 with introduction of an oscillatory movement on the orthogonal at the work plane axe.
          G45Pick up automatic tool cycle (subroutine).
          G47Release automatic tool cycle (subroutine).
          G49Function of connection programs in memory.
          G50Cancel G51.
          G51Rotation-translation according to programmed point (X,Y,E)
          G55Rotation cycle rotary head without adjustment of the plane with the rotation angle.
          G56Rotation cycle rotary head with adjustment of the plane with the rotation angle
          G58Rounding off 360° on rotary axes with absolute measuring system
          G59Return from subroutine
          G60Cancel G 61.
          G61Scale factor for X Y Z axes.
          G62Cancel G63
          G63High speed milling with smooth trajectory
          G65-G69Given to digitizing cycles
          G70-G71Inch-Metric Modes
          G75-G77Given to digitizing cycles
          G79Given to the digitizing cycles
          G80Cancel canned cycles from G81 to G 89.
          G81Drilling cycle
          G82Drilling cycle (the same as G81)
          G83Deep hole drilling cycle
          G84Tapping cycle
          G85Deep hole drilling cycle with high return
          G86Boring cycle with spindle stop.
          G87Boring cycle (the same as G86)
          G88Drilling cycle for more walls
          G89Reverse boring cycle
          G90-G93G function not recognized
          G94Feedrate in mm/min. (Active at the start)
          G95Feedrate in micron/spindle revolution.
          G96Boring cycle with detachment from wall
          G97Macro instruction for milling circle or a thread
          G99Input M functions or messages with Stopped axes
          G300Measuring tool length cycle (option).
          G301Verifying tool length cycle with stop (option).
          G302Verifying tool length cycle with automatic research of substitutive tool (option).
          G303Measuring tool radius cycle (option).
          G304Verifying tool radius cycle with stop (option).
          G305Verifying tool radius cycle with automatic research of substitutive tool (option).
          G306Measuring tool length and radius cycle (option).
          G311Feeler adjustment of the coefficients (option).
          G312Zero recovery on a pin (option).
          G313Zero recovery on a hole (option).
          G314Zero recovery on Z (option).
          G316Redefinition axes CNC IND function
          G317Redistribution axes function
          G318Definition tern axes feeler function
          G319Assignation synonyme axes function
          G320Disable the G321.
          G321Q increase sum abilitation.
          G322Disable the grinding cycle.
          G323Enable the grinding cycle.
          G324Exclusion of the axes repositioning with LNS.
          G325Zero recovery on a square (option).
          G326Zero recovery on a edge (option).
          G327Origins and tools lengths management.
          G328Delta length correction on the tools table.
          G329Delta radius correction on the tools table.
          G330GPF repositioning.
          G331Recovery G31 function with GPF.
          G332Recovery G32 function with GPF.
          G335Enable the registration of the machine quotas on disk.
          G336Disable the registration of the machine quotas on disk.
          G340Radius correction in profile from part-program.
          G341Radius correction in profile from table.
          G342Activation of the Delta L on the tool length.
          G343Cancels G342.
          G344Activation of the Delta R on the radius tool.
          G345Cancels G344.
          G346Automatic substitution of the tool with time expires.
          G349Subroutine.
          G350Dividing table axis initials modification.
          G351Roto-translation.
          G352Save the axes locking and lock all the axes.
          G353Restore the axes locking saved with G352.
          G354Activation of the matrix rotation on the programmed points.
          G355Rotation cycle rotary head without adjustment of the head length (option).
          G356Rotation cycle rotary head with adjustment of the plane with the rotation angle (Option).
          G359Return to the calling program for files activated with G349.
          G360Work by N.U.R.B.S. with 3 to 5 axes movement.
          G362Introduction of the polygonal vertex in digitizing (option).
          G363Introduction of the depth in digitizing (option).
          G364Introduction of the second polygonal (option).
          G370-G376Digitizing cycles (option).
          G377Length tools pre-setting qualification (option).
          G378Radius tools pre-setting qualification (option).
          G384Rigid tapping cycle (option).
          G390Predisposition for the programming in absolutes quotas.
          G391Cancels the G390.
          G392ON/OFF feeler zero recovery on a pin (option).
          G393ON/OFF feeler zero recovery on a hole (option).
          G394ON/OFF feeler zero recovery in Z (option).
          G395ON/OFF feeler zero recovery on a square (option).
          G396ON/OFF feeler zero recovery on an edge (option).
          G398Piece research with ON/OFF feeler and quotas determination (option).
          G399Rapid to 5 mm from the positive Z axes limit.
          G428/Pick-up piece function (option).
          G429/Pick-up piece function (option).
          G500Measuring tool length cycle with manual tool change (option).
          G503Measuring tool radius cycle with manual tool change (option).
          G506Measuring tool length and radius cycle with manual tool change (option).
          G550Configuration automatic re-establishment.
          G551Configuration automatic change.
          G571-G578Digitizing cycles (option).
          G731Tool radius compensation in space with zero on the tool point.
          G703Tail-stock forward with reduced air pressure (optional)
          G704Tail-stock forward with normal air pressure (optional)
          G705Tailstock backward (optional)
          G740Cancels G748.
          G746Origins translation and rotation associated to the table rotation.
          G748Origins translation associated to the table rotation.
          G7513D Translation.
          G7523D Rotation.
          G755Head rotation in centre of spherical tools .
          手机赢三张