<dd id="ytclb"></dd>
    1. <progress id="ytclb"></progress>

        <dd id="ytclb"></dd>

          C.B.Ferrari E560 Machining Centers M Codes

          C.B.Ferrari Elexa E560 M Codes complete list for cnc machinists who work on C.B.Ferrari cnc machining centers.

          CB FERRARI 5-AXIS E520 CNC Elexa

          C.B.Ferrari E560 M Codes

          M CodeDescription
          M1Programmed stop.
          M3Clockwise spindle rotation.
          M4Anticlockwise spindle rotation.
          M5Stop spindle.
          M6Manual changing tool (Associate to G99).
          M7Enable coolant 1 (outside water).
          M8Enable coolant 2 (water in the spindle).
          M9Disable coolant.
          M10Enable non-programmed axes locking.
          M11Disable non-programmed axes locking.
          M13M3+M7
          M14M4+M7
          M15M3+M8
          M16M4+M8
          M17M3+M50
          M18M4+M50
          M19Spindle orientation.
          M20Cancels inversion sign on axes (active at the start).
          M21Mirror X axis (Quotas X and I, change G2 in G3 and G41 in G42).
          M22Mirror Y axis (Quotas Y and J, change G2 in G3 and G41 in G42).
          M23Mirror Z axis (Quotas Z and K, change G2 in G3 and G41 in G42).
          M31Allow inversion of the sign (only for quotas X and I).
          M32Allow inversion of the sign (only for quotas Y and J).
          M33Allow inversion of the sign (only for quotas Z and K).
          M37Allow inversion of the sign (only for quotas XY and IJ QX QY).
          M38Allow inversion of the sign (only for quotas XZ and IK QX QZ).
          M39Allow inversion of the sign (only for quotas YZ and JK QY QZ).
          M40Allow low gamma (if it is on tool machine)
          M42Allow high gamma (if it is on tool machine)
          M50Enable coolant 3 (outside air)
          M51Enable coolant 4 (outside air-oil)
          M52Enable coolant 5 (air-oil in the spindle)
          M53Enable coolant 4 (outside oil)
          M58Rotary table revolutions reset
          M60Exit strobe 200 msec for pneumatic table control
          M80General power off
          M110Axis A Cone cleaning
          M111Axis A STOP Cone cleaning
          M113M3+M51
          M114M4+M51
          M115M3+M52
          M116M4+M52
          M117M3+M53
          M118M4+M53
          M124Tools magazine OUT (optional)
          M125Tools magazine IN (optional)
          M135Magazine rotation to the position of tool T.. ( M135 T1 )
          M158Grip opening (optional)
          M159Grip closing (optional)
          M177Rotable magazine door open
          M180Rotable magazine door close
          M184Tools/pieces magazine OUT (optional)
          M185Tools/pieces magazine IN (optional)
          M200Work time
          M704Tail-stock forward with normal air pressure (optional)
          M704/1Tail-stock forward with reduced air pressure (optional)
          M705Tailstock backward (optional)
          M708Tail-stock locking (optional)
          M709Tailstock releasing (optional)
          M728Disable coolant selector
          M729Enable coolant selector
          M730Machine pneumatic door open (optional)
          手机赢三张