<dd id="ytclb"></dd>
    1. <progress id="ytclb"></progress>

        <dd id="ytclb"></dd>

          Fanuc 31i G Codes Machining Center – Fanuc 30i 31i 32i

          Fanuc 31i G codes list for cnc machinists programmers who work on cnc machining centers with Fanuc?30i 31i 32i cnc controls.

          Fanuc 31i cnc control

          Fanuc CNC Controls

          Following list of g codes applies to following cnc controls as well.

          • Fanuc Series 30i/300i/300is-MODEL A
          • Fanuc Series 31i/310i/310is-MODEL A5
          • Fanuc Series 31i/310i/310is-MODEL A
          • Fanuc Series 32i/320i/320is-MODEL A

          Fanuc 31i G Codes

          G CodeDescription
          G00Positioning (rapid traverse)
          G01Linear interpolation (cutting feed)
          G02Circular interpolation CW or helical interpolation CW
          G03Circular interpolation CCW or helical interpolation CCW
          G02.2, G03.2Involute interpolation CW/CCW
          G02.3, G03.3Exponential interpolation CW/CCW
          G02.4, G03.4Three-dimensional coordinate conversion CW/CCW
          G04Dwell
          G05AI contour control (high-precision contour control compatible command)
          G05.1AI contour control / Nano smoothing / Smooth interpolation
          G05.4HRV3,4 on/off
          G06.2NURBS interpolation
          G07Hypothetical axis interpolation
          G07.1 (G107)Cylindrical interpolation
          G08AI contour control (advanced preview control compatible command)
          G09Exact stop
          G10Programmable data input
          G10.6Tool retract and recover
          G10.9Programmable switching of diameter/radius specification
          G11Programmable data input mode cancel
          G12.1Polar coordinate interpolation mode
          G13.1Polar coordinate interpolation cancel mode
          G15Polar coordinates command cancel
          G16Polar coordinates command
          G17XY plane selection
          G18ZX plane selection
          G19YZ plane selection
          G20 (G70)Input in inch
          G21 (G71)Input in mm
          G22Stored stroke check function on
          G23Stored stroke check function off
          G25Spindle speed fluctuation detection off
          G26Spindle speed fluctuation detection on
          G27Reference position return check
          G28Automatic return to reference position
          G29Movement from reference position
          G302nd, 3rd and 4th reference position return
          G30.1Floating reference position return
          G31Skip function
          G31.8EGB-axis skip
          G33Threading
          G34Variable lead threading
          G35Circular threading CW
          G36Circular threading CCW
          G37Automatic tool length measurement
          G38Cutter or tool nose radius compensation : preserve vector
          G39Cutter or tool nose radius compensation : corner circular interpolation
          G40Cutter or tool nose radius compensation : cancel
          Three-dimensional cutter compensation : cancel
          G41Cutter or tool nose radius compensation : left
          Three-dimensional cutter compensation : left
          G41.2Cutter compensation for 5-axis machining : left (type 1)
          G41.3Cutter compensation for 5-axis machining : (leading edge offset)
          G41.4Cutter compensation for 5-axis machining : left (type 1) (FS16i-compatible command)
          G41.5Cutter compensation for 5-axis machining : left (type 1) (FS16i-compatible command)
          G41.6Cutter compensation for 5-axis machining : left (type 2)
          G42Cutter or tool nose radius compensation : right
          Three-dimensional cutter compensation : right
          G42.2Cutter compensation for 5-axis machining : right (type 1)
          G42.4Cutter compensation for 5-axis machining : right (type 1) (FS16i-compatible command)
          G42.5Cutter compensation for 5-axis machining : right (type 1) (FS16i-compatible command)
          G42.6Cutter compensation for 5-axis machining : right (type 2)
          G40.1Normal direction control cancel mode
          G41.1Normal direction control on : right
          G42.1Normal direction control on : left
          G43Tool length compensation +
          G44Tool length compensation –
          G43.1Tool length compensation in tool axis direction
          G43.4Tool center point control (type 1)
          G43.5Tool center point control (type 2)
          G45Tool offset increase
          G46Tool offset decrease
          G47Tool offset double increase
          G48Tool offset double decrease
          G49 (G49.1)Tool length compensation cancel
          G50Scaling cancel
          G51Scaling
          G50.1Programmable mirror image cancel
          G51.1Programmable mirror image
          G50.2Polygon turning cancel
          G51.2Polygon turning
          G52Local coordinate system setting
          G53Machine coordinate system setting
          G53.1Tool axis direction control
          G54 (G54.1)Workpiece coordinate system 1 selection
          G55Workpiece coordinate system 2 selection
          G56Workpiece coordinate system 3 selection
          G57Workpiece coordinate system 4 selection
          G58Workpiece coordinate system 5 selection
          G59Workpiece coordinate system 6 selection
          G60Single direction positioning
          G61Exact stop mode
          G62Automatic corner override
          G63Tapping mode
          G64Cutting mode
          G65Macro call
          G66Macro modal call A
          G66.1Macro modal call B
          G67Macro modal call A/B cancel
          G68Coordinate system rotation start or 3-dimensional coordinate conversion mode on
          G69Coordinate system rotation cancel or 3-dimensional coordinate conversion mode off
          G68.2Feature coordinate system selection
          G72.1Figure copy (rotation copy)
          G72.2Figure copy (linear copy)
          G73Peck drilling cycle
          G74Left-handed tapping cycle
          G76Fine boring cycle
          G80Canned cycle cancel
          G80.5Electronic gear box 2 pair: synchronization cancellation
          G80.8Electronic gear box: synchronization cancellation
          G81Drilling cycle or spot boring cycle
          G81.1Chopping
          G81.5Electronic gear box 2 pair: synchronization start
          G81.8Electronic gear box: synchronization start
          G82Drilling cycle or counter boring cycle
          G83Peck drilling cycle
          G84Tapping cycle
          G84.2Rigid tapping cycle (FS15 format)
          G84.3Left-handed rigid tapping cycle (FS15 format)
          G85Boring cycle
          G86Boring cycle
          G87Back boring cycle
          G88Boring cycle
          G89Boring cycle
          G90Absolute programming
          G91Incremental programming
          G91.1Checking the maximum incremental amount specified
          G92Setting for workpiece coordinate system or clamp at maximum spindle speed
          G92.1Workpiece coordinate system preset
          G93Inverse time feed
          G94Feed per minute
          G95Feed per revolution
          G96Constant surface speed control
          G97Constant surface speed control cancel
          G98Canned cycle : return to initial level
          G99Canned cycle : return to R point level
          G107Cylindrical interpolation
          G112Polar coordinate interpolation mode
          G113Polar coordinate interpolation mode cancel
          手机赢三张