<dd id="ytclb"></dd>
    1. <progress id="ytclb"></progress>

        <dd id="ytclb"></dd>

          GTCNC-60TT G Codes M Codes

          GTCNC-60TT?G Codes M Codes

          GREAT-60TT or GTCNC-60TT?G Codes M Codes for CNC Lathe.

          GTCNC-60TT G Codes M Codes Programming

          G Codes

          G CodeDescription
          G00Rapid motion
          G01Linear interpolation
          G02Circular interpolation CW
          G03Circular interpolation CCW
          G33Thread cutting
          G04Dwell
          G20Inch format input
          G21Metric format input
          G28X, Z axis return to the first reference point
          G281X axis return to the first reference point
          G283Z axis return to the first reference point
          G26ZX axis return to program original point
          G261X axis return to program original point
          G263Z axis return to program original point
          G40tool radius compensation cancel
          G41Cutter radius compensation, left
          G42Cutter radius compensation, right
          G60Accurate positioning
          G64Continual path processing
          G77Cylindrical/conical in/ex diameter cutting canned cycle
          G78Thread cutting canned cycle
          G79End face cutting canned cycle
          G70Finish turning cycle
          G71Cylindrical rough turning multi-cycle
          G72End face rough turning multi-cycle
          G173Multiple mode contour rough turning multi-cycle
          G174End face pick drilling multi-cycle
          G175Interior/exterior diameter drilling/grooving multi-cycle
          G176Thread cutting multi-cycle
          G90Absolute programming
          G91Incremental programming
          G52Set local coordinates
          G94Feed per minute mode
          G95Feed per revolution mode
          G96Constant surface speed control
          G97Constant surface speed control cancel
          G22Program recycle
          G800Program recycle cancel

          M Codes

          M CodeDescription
          M00Program pause.
          M02Program end.
          M30Program end.
          M20Program end, repeated executes program according to running times set in parameter, applied to test CNC
          M03Spindle CW
          M04Spindle CCW
          M05Spindle stop
          M08Cooling on
          M09Cooling off
          M10Chuck clamping
          M11Chuck unclamping
          M55Center tightening
          M54Center release
          M23Lubricate on
          M22Lubricate off
          M25Self-defined 1 on
          M24Self-defined 1 off
          M71Self-defined 2 on
          M70Self-defined 2 off
          M73Self-defined 3 on
          M72Self-defined 3 off
          M75Self-defined 4 on
          M74Self-defined 4 off
          M77Self-defined 5 on
          M76Self-defined 5 off
          M79Self-defined 6 on
          M78Self-defined 6 off
          M81Self-defined 7 on
          M80Self-defined 7 off
          M83Self-defined 8 on
          M82Self-defined 8 off
          M12Check 0V valid
          M13Check +24V valid
          M18Check 0V valid
          M19Check +24V valid
          M28Check 0V valid
          M29Check +24V valid
          M14Check 0V valid skip
          M15Check +24V valid skip
          M16Check 0V valid skip
          M17Check +24V valid skip
          M97Skip
          M98Calling
          M99Calling return
          M411st grade
          M422nd grade
          M433rd grade
          M444th grade
          M317Clear X-axis of Machine coordinates
          M319Clear Z-axis of Machine coordinates
          M320Clear both X and Z-axis of Machine coordinates
          手机赢三张