<dd id="ytclb"></dd>
    1. <progress id="ytclb"></progress>

        <dd id="ytclb"></dd>

          Sinumerik POCKET2 Circular Pocket Milling

          Sinumerik POCKET2 Circular pocket milling

          With Sinumerik POCKET2 cycle, circular pockets can be produced.
          Sinumerik POCKET2 cycle is a combined roughing/finishing cycle.

          Programming

          POCKET2 (RTP, RFP, SDIS, DP, DPR, PRAD, CPA, CPO,
                   FFD, FFP1, MID, CDIR, FAL, VARI, MIDF, FFP2, SSF)

          Sinumerik POCKET2 Circular pocket milling

          Parameters

          ParameterDescription
          RTPReturn plane (absolute)
          RFPReference plane (absolute)
          SDISSafety distance (enter without sign)
          DPFinal drilling depth/elongated hole depth/slot depth/pocket depth (absolute)
          DPRFinal drilling depth/elongated hole depth/slot depth/pocket depth relative to reference plane (enter without sign)
          PRADPocket radius (enter without sign)
          CPACenter point circle/pocket, abscissa (absolute)
          CPOCenter point circle/pocket, ordinate (absolute)
          FFDFeedrate for depth infeed
          FFP1Feedrate for surface machining
          MIDMaximum insertion depth for insertion (enter without sign)
          CDIRDirection of machining Values:
          2 (for G2)
          3 (for G3)
          FALCorrect finishing allowance for contour (enter without sign)
          VARIMachining mode
          0=complete machining
          1=solid machining to finishing allowance
          2=only machining of finishing allowance
          MIDFMaximum insertion depth for final allowance
          FFP2Feedrate for final allowance
          SSFSpeed during finishing
          手机赢三张