<dd id="ytclb"></dd>
    1. <progress id="ytclb"></progress>

        <dd id="ytclb"></dd>

          Sinumerik SLOT2 Circumferential slot

          Sinumerik SLOT2 Circumferential slot

          With Sinumerik SLOT2 cycle, circular slots can be produced arranged on a circle.
          Sinumerik SLOT2 cycle is a combined roughing/finishing cycle.

          Programming

          SLOT2 (RTP, RFP, SDIS, DP, DPR, NUM, AFSL, WID,
                CPA, CPO, RAD, STA1, INDA, FFD, FFP1, MID, CDIR,
                FAL, VARI, MIDF, FFP2, SSF)

          Sinumerik SLOT2 Circumferential slot

          Parameters

          ParameterDescription
          RTPReturn plane (absolute)
          RFPReference plane (absolute)
          SDISSafety distance (enter without sign)
          DPFinal drilling depth/elongated hole depth/slot depth/pocket depth (absolute)
          DPRFinal drilling depth/elongated hole depth/slot depth/pocket depth relative to reference plane (enter without sign)
          NUMNumber of holes/elongated holes/slots
          AFSLAngle for slot length (enter without sign)
          WIDSlot width/pocket width (enter without sign)
          CPACenter point circle/pocket, abscissa (absolute)
          CPOCenter point circle/pocket, ordinate (absolute)
          RADRadius of circle (enter without sign)
          STA1Starting angle, values: -180 to 180 degrees
          INDAIndexing angle
          FFDFeedrate for depth infeed
          FFP1Feedrate for surface machining
          MIDMaximum insertion depth for insertion (enter without sign)
          CDIRDirection of machining Values:
          2 (for G2)
          3 (for G3)
          FALCorrect finishing allowance for contour (enter without sign)
          VARIMachining mode
          0=complete machining
          1=solid machining to finishing allowance
          2=only machining of finishing allowance
          MIDFMaximum insertion depth for final allowance
          FFP2Feedrate for final allowance
          SSFSpeed during finishing
          手机赢三张